Gigabyte B450I Aorus Pro WIFI AM4 ITX Motherboard

• Supports AMD Ryzen™ 2nd Generation/ Ryzen™ with Radeon™ Vega Graphics/ Athlon™ with Radeon™ Vega Graphics/ Ryzen™ 1st Generation Processors

• Dual Channel ECC/ Non-ECC Unbuffered DDR4, 2 DIMMs

• Intel® Dual Band 802.11ac Wave2 WIFI & BT 5

• DisplayPort, HDMI*2 Ports for Multiple Display

• Ultra-Fast NVMe PCIe Gen3 x4 M.2 with Thermal Guard

• ALC1220-VB Enhance 114dB(Rear)/ 110dB(Front) SNR in Microphone with High-end Audio Capacitors

• RGB FUSION 2.0 with Multi-Zone LED Light Show Design, Supports Digital LED & RGB LED Strips

• Intel® GbE LAN with cFosSpeed Internet Accelerator Software

• Smart Fan 5 Features 5 Temperature Sensors and 2 Hybrid Fan Headers with FAN STOP

• APP Center Including EasyTune™ and Cloud Station™ Utilities

• CEC 2019 Ready, Save Power with a Simple Click

• PU
  (Please refer "CPU Support List" for more information.)
1. AM4 Socket: Support for AMD Ryzen™ 2nd Generation/ Ryzen™ with Radeon™ Vega Graphics/ Athlon™ with Radeon™ Vega Graphics/ Ryzen™ 1st Generation Processors
• Chipset
1. AMD B450
• Memory
  (Please refer "Memory Support List" for more information.)
1. 2 x DDR4 DIMM sockets supporting up to 32 GB of system memory
2. Dual channel memory architecture
3. Support for DDR4 3200(O.C.)/2933/2667/2400/2133 MHz memory modules
4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules
   * ECC is only supported with AMD Ryzen™ and Athlon™ of PRO-series CPU.
5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
6. Support for Extreme Memory Profile (XMP) memory modules
• Onboard Graphics
  Integrated Graphics Processor:Support for up to 3 displays at the same time
  Maximum shared memory of 16 GB
  
  (Note) Actual support may vary by CPU.
  
1. 1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz
   * Support for DisplayPort 1.2 version.
2. 2 x HDMI ports, supporting a maximum resolution of 4096x2160@60 Hz(Note)
   * Support for HDMI 2.0 version and HDCP 2.2.(Note)
   * One of HDMI function is limited if using an AMD Athlon™ 200-series APU.
• Audio
1. Realtek® ALC1220-VB codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
   * To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
4. Support for S/PDIF Out
• LAN
1. Intel® GbE LAN chip (10/100/1000 Mbit)
• Wireless Communication module
1. Wi-Fi 802.11a/b/g/n/ac, supporting 2.4/5 GHz Dual-Band
2. BLUETOOTH 5
3. Support for 11ac 160 MHz wireless standard and up to 1.73 Gbps data rate
   * Actual data rate may vary depending on environment and equipment.
   ** Intel WIFI driver only support for Win10-64bit
• Expansion Slots
  (Note) Actual support may vary by CPU.
1. 1 x PCI Express x16 slot, running at x16(Note)
   (The PCIEX16 slot conforms to PCI Express 3.0 standard.)
2. 1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI)
• Storage Interface
1. 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe 3.0 x4/x2 SSD support)
2. 4 x SATA 6Gb/s connectors
3. Support for RAID 0, RAID 1, and RAID 10
• USB
  Chipset:Integrated in the APU:
1. 4 x USB 3.1 Gen 1 ports on the back panel
1. 2 x USB 3.1 Gen 2 Type-A ports (red) on the back panel
2. 2 x USB 3.1 Gen 1 ports available through the internal USB header
3. 2 x USB 2.0/1.1 ports available through the internal USB header
• Internal I/O Connectors
1. 1 x 24-pin ATX main power connector
2. 1 x 8-pin ATX 12V power connector
3. 1 x CPU fan header
4. 1 x system fan header
5. 1 x digital LED strip header
6. 1 x CPU cooler LED strip/RGB LED strip header
7. 4 x SATA 6Gb/s connectors
8. 1 x M.2 Socket 3 connector
9. 1 x front panel header
10. 1 x front panel audio header
11. 1 x S/PDIF Out header
12. 1 x speaker header
13. 1 x USB 3.1 Gen 1 header
14. 1 x USB 2.0/1.1 header
15. 1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S module only)
16. 1 x Clear CMOS jumper
17. 1 x chassis intrusion header
• Back Panel Connectors
1. 1 x DisplayPort
2. 2 x HDMI ports
3. 2 x USB 3.1 Gen 2 Type-A ports (red)
4. 4 x USB 3.1 Gen 1 ports
5. 1 x RJ-45 port
6. 2 x SMA antenna connectors (2T2R)
7. 3 x audio jacks
• I/O Controller
1. iTE® I/O Controller Chip
• H/W Monitoring
1. Voltage detection
2. Temperature detection
3. Fan speed detection
4. Overheating warning
5. Fan fail warning
6. Fan speed control
   * Whether the fan speed control function is supported will depend on the cooler you install.
• BIOS
1. 1 x 128 Mbit flash
2. Use of licensed AMI UEFI BIOS
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
• Unique Features
1. Support for APP Center
   * Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
   @BIOS
   3D OSD
   AutoGreen
   Cloud Station
   EasyTune
   Fast Boot
   Game Boost
   ON/OFF Charge
   RGB Fusion
   Smart Backup
   Smart Keyboard
   Smart TimeLock
   Smart HUD
   Smart Survey
   System Information Viewer
   USB Blocker
   V-Tuner
2. Support for Q-Flash
3. Support for Xpress Install
• Bundle Software
1. Norton® Internet Security (OEM version)
2. cFosSpeed
• Operating System
1. Support for Windows 10 64-bit
2. Support for Windows 7 64-bit
   * To support Windows 7 64-bit, you must install an AMD Pinnacle Ridge & Summit Ridge CPU.
   * Intel WIFI driver only support for Win10-64bit
   * Please download the "Windows USB Installation Tool" from GIGABYTE's website and install it before installing Windows 7.
• Form Factor
1. Mini-ITX Form Factor; 17.0cm x 17.0cm
• Remark
1. Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
2. Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP. If drivers are available from the vendors, we will update them on the GIGABYTE website.