CHIPSET

AMD B450

MEMORY

4 x DDR4 DIMM   sockets supporting up to 64 GB of system memory

Dual channel memory   architecture

Support for DDR4   3200(O.C.)/2933/2667/2400/2133 MHz memory modules

Support for ECC   Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)

Support for non-ECC   Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

Support for Extreme   Memory Profile (XMP) memory modules

(Please refer   "Memory Support List" for more information.)

ONBOARD GRAPHICS

Integrated Graphics   Processor:

1 x DVI-D port,   supporting a maximum resolution of 1920x1200@60 Hz

* The DVI-D port   does not support D-Sub connection by adapter.

1 x HDMI port,   supporting a maximum resolution of 4096x2160@60 Hz

* Support for HDMI   2.0 version and HDCP 2.2.

* Actual support   may vary by CPU.

Maximum shared   memory of 16 GB

AUDIO

Realtek® ALC1220-VB   codec

High Definition   Audio

2/4/5.1/7.1-channel

Support for S/PDIF   Out

LAN

Intel® GbE LAN chip   (10/100/1000 Mbit)

EXPANSION SLOTS

1 x PCI Express x16   slot, running at x16 (PCIEX16)

* Actual support   may vary by CPU.

* For optimum   performance, if only one PCI Express graphics card is to be installed, be   sure to install it in the PCIEX16 slot.

(The PCIEX16 slot   conforms to PCI Express 3.0 standard.)

1 x PCI Express x16   slot, running at x4 (PCIEX4)

* The PCIEX4 slot   shares bandwidth with the PCIEX1_1 and PCIEX1_2 slots. The PCIEX4 slot operates   at up to x2 mode when the PCIEX1_1/PCIEX1_2 slot is populated. The PCIEX4   slot operates at up to x4 mode when both of the PCIEX1_1 and PCIEX1_2 slots   are empty.

1 x PCI Express x16   slot, running at x1 (PCIEX1_2)

1 x PCI Express x1   slot (PCIEX1_1)

(The PCIEX4 and   PCIEX1 slots conform to PCI Express 2.0 standard.)

MULTI-GRAPHICS TECHNOLOGY

Support for AMD   Quad-GPU CrossFire™ and 2-Way AMD CrossFire™ technologies

STORAGE INTERFACE

1 x M.2 connector   (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe 3.0 x4/x2 SSD   support) (M2A_SOCKET)

1 x M.2 connector   (Socket 3, M key, type 2242/2260/2280 PCIe 3.0 x2 SSD support)(M2B_SOCKET)

6 x SATA 6Gb/s   connectors

Support for RAID 0,   RAID 1, and RAID 10

* Refer to   "1-7 Internal Connectors," for the installation notices for the M.2   and SATA connectors.

USB

Chipset:

1 x USB Type-C™   port on the back panel, with USB 3.1 Gen 2 support

1 x USB 3.1 Gen 2   Type-A port (red) on the back panel

2 x USB 3.1 Gen 1   ports available through the internal USB header

4 x USB 2.0/1.1   ports available through the internal USB headers

CPU:

4 x USB 3.1 Gen 1   ports on the back panel

INTERNAL I/O CONNECTORS

1 x 24-pin ATX main   power connector

1 x 8-pin ATX 12V   power connector

2 x M.2 Socket 3   connectors

6 x SATA 6Gb/s   connectors

1 x CPU fan header

1 x water cooling   CPU fan header

2 x system fan   headers

1 x system fan/water   cooling pump header

1 x CPU cooler LED   strip/RGB LED strip header

2 x digital LED   strip headers

2 x digital LED   strip power select jumpers

1 x RGB (RGBW) LED   strip header

1 x front panel   header

1 x front panel   audio header

1 x S/PDIF Out   header

1 x USB 3.1 Gen 1   header

2 x USB 2.0/1.1   headers

1 x Trusted   Platform Module (TPM) header (2x10 pin, for the GC-TPM2.0 module only)

1 x Clear CMOS   jumper

BACK PANEL CONNECTORS

1 x HDMI port

1 x DVI-D port

4 x USB 3.1 Gen 1   ports

1 x USB Type-C™   port, with USB 3.1 Gen 2 support

1 x USB 3.1 Gen 2   Type-A port (red)

1 x RJ-45 port

1 x optical S/PDIF   Out connector

5 x audio jacks

I/O CONTROLLER

iTE® I/O Controller   Chip

H/W MONITORING

Voltage detection

Temperature   detection

Fan speed detection

Water cooling flow   rate detection

Overheating warning

Fan fail warning

Fan speed control

* Whether the fan   (pump) speed control function is supported will depend on the fan (pump) you   install.

BIOS

2 x 128 Mbit flash

Use of licensed AMI   UEFI BIOS

Support for   DualBIOS™

PnP 1.0a, DMI 2.7,   WfM 2.0, SM BIOS 2.7, ACPI 5.0

UNIQUE FEATURES

Support for APP   Center

* Available   applications in APP Center may vary by motherboard model. Supported functions   of each application may also vary depending on motherboard specifications.

3D OSD

@BIOS

AutoGreen

Cloud Station

EasyTune

Fast Boot

Game Boost

ON/OFF Charge

RGB Fusion

Smart Backup

Smart Keyboard

Smart TimeLock

Smart HUD

Smart Survey

System Information   Viewer

USB Blocker

V-Tuner

Support for Q-Flash

Support for Xpress   Install

BUNDLED SOFTWARE

Norton® Internet   Security (OEM version)

cFosSpeed

OS

Support for Windows   10 64-bit

Support for Windows   7 64-bit

* To support   Windows 7 64-bit, you must install an AMD Pinnacle Ridge & Summit Ridge   CPU.

* Please download   the "Windows USB Installation Tool" from GIGABYTE's website and   install it before installing Windows 7.

FORM FACTOR

ATX Form Factor;   762.5px x 610px

REMARK

Due to different   Linux support condition provided by chipset vendors, please download Linux   driver from chipset vendors' website or 3rd party website.

Most   hardware/software vendors may no longer offer drivers to support   Win9X/ME/2000/XP. If drivers are available from the vendors, we will update   them on the GIGABYTE website.